Selection of Control Module Sensor When Programming Speed Sig.

Selection Of Control Module Sensor Version When Programming The Speed Signal







Note The speed signal cannot be programmed on certain older control module variants. The P/N of the control module must be read off to identify the control module version.


- Ignition on
- Read off the P/N of the ECC control module. Compare it with the P/N below.

The type of speed signal cannot be programmed on the following control modules (P/N):
- 9134783
- 9134784
- 9171404
- 9171405
- 9171551
- 9171552
- 9171594
- 9171595
- 9459455
- 9459456.

Is the control module P/N different from the above list?

Yes - Programming the Speed Signal, ECC

No - Information