Operation CHARM: Car repair manuals for everyone.
Home >> Volvo >> 2000 >> C70 Convertible L5-2.4L Turbo VIN 56 B5244T >> Repair and Diagnosis >> Body and Frame >> Seats >> Testing and Inspection >> Programming and Relearning >> Calibration, Entry Position >> Power Seat - Left
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Power Seat - Left






Calibration, entry position

Calibrating the entry position, power seat - left

Note! If it is not possible to use VCT2000 for calibration, use Volvo Scan Tool (ST) as a stand-alone tool.




- Ignition off
- Disconnect the Volvo Scan Tool (ST) from the VIDA station
- Connect the Volvo Scan Tool (ST) to the data link connector (DLC). See Connecting the Volvo System Tester Connecting the Volvo System Tester
- Ignition on.
Calibrate the limit positions using the Volvo Scan Tool (ST) as a stand-alone tool. See Fault-tracing and programming using the Volvo Scan Tool (ST) Fault-Tracing and Programming Using the Volvo Scan Tool (ST).

Note! The entry position cannot be programmed using Volvo Scan Tool (ST) on control modules with P/N 8651558. The service is not available on the Volvo Scan Tool (ST) for these control modules. Calibrate manually instead Manually programming entry position Manually Programming Entry Position






Continue - DONE

-------------------------------------------------

pro multis · About Operation CHARM