Connecting The Breakout Box. Central Electronic Module (CEM)

Connecting the breakout box

Special tools:
951 1511 Adapter 951 1511 Adapter
951 1428 Breakout box 951 1428 Breakout Box
951 1499 Cable 951 1499 Cable

Connecting the breakout box




- Ignition off.
- Release the central electronic module (CEM).
- Disconnect the four control module connectors.
Connect adapter 951 1511 Adapter 951 1511 Adapter (26-18-16-12 pin) to the control module connectors and connect breakout box 951 1428 Breakout box 951 1428 Breakout Box and wiring 951 1499 Cable 951 1499 Cable to the adapter.
Disconnect the breakout box in reverse order.

Other information:
- To access / replace the central electronic module (CEM), see Replacing central electronic module (CEM) Service and Repair.
- For information about the signals and other values, see Signal specification Signal Specification. Central Electronic Module (CEM).