Connecting the Driver Information Module (DIM) Test Box

CONNECTING THE DRIVER INFORMATION MODULE (DIM) TEST BOX

Special tools: 9511463, 9511428, 9511499, 981 3190







Connecting the test box

Ignition off

Remove interior fuse 24 (11C/24)

Loosen the combined instrument as described in Combined Instrument Panel, Replacing

Release control unit connector.

Connect adapter 951 1463 (22-16-14-pin) to control unit connector and connect test box 951 1428 and wire 951 1499 to adapter.

Alternatively connect test box 981 3190 to adapter.

Disconnect the test box in the reverse order.

Additional information:
- To remove the combined instrument, Combined Instrument Panel, Replacing
- For information about signals and other values, Signal Description, Driver Information Module (DIM)