Verification

Verification







Hint: After carrying out the repair check that the fault has been remedied.

- Ignition off
- Reconnect the connectors, reinstall components etc.
- Connect the breakout box
- Connect an ohmmeter between terminals #A16(A16) and #A1(A1).

Turn the key in the driver's door to the locking position. The value must be infinite when the lock is unaffected and 0 [ohm] when the key is turned to the locking position.

- Connect an ohmmeter between terminals #A18(A18) and #A1(A1).

Turn the key in the driver's door to the unlocking position.
The value must be infinite when the lock is unaffected and 0 [ohm] when the key is turned to the unlocking position.

Other information
- To connect the breakout box, Reading and Clearing Diagnostic Trouble Codes