Electronic Climate Control Panel

AI8 Replacing Bulb in the Climate Control Unit Panel (With ECC):





NOTE: For type of bulb, Specifications

- Ignition off.
- Remove radio/panel, if installed, and press in the catch on the underside of the unit while pressing it out.
- Disconnect connectors on the reverse.
- Remove the four screws holding the front panel.
- Pull out the front panel and remove the bulb holder by twisting it gently. There are three bulbs. Use angled round-nosed pliers.
- Replace bulb(s).
- Assemble in reverse order.

CAUTION: Do not tighten screws too hard.

- Check that the bulbs light.