Instrument Visor Removal/Installation

Instrument Visor Removal/Installation

Special Tools Required

- KTC Trim Tool Set SOJATP2014
*

NOTE:

- Take care not to scratch the dashboard or the related parts.
- Use the appropriate tool from the KTC trim tool set to avoid damage when removing components.

1. Remove these items:

- Center panel Dashboard Center Panel Removal/Installation
- Driver's vent panel Service and Repair

2. Adjust the steering column to the full tilt down position and to the full telescopic out position.

3. Gently pull out the instrument visor (A) to detach the clips (B, C), then remove it.





4. Install the visor in the reverse order of removal, and note these items:

- If the clips are damaged or stress-whitened, replace them with new ones.
- Push the clips into place securely.