Removal
AUDIO / VIDEO: RADIO RECEIVER: REMOVAL
1. PRECAUTION (for Radio and Display Type with Intuitive Parking Assist System)
NOTICE:
* After turning the ignition switch off, waiting time may be required before disconnecting the cable from the negative (-) battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) battery terminal notices before proceeding with work Service Precautions.
* A Hard Disk Drive (HDD) is built into the radio and display receiver assembly to store multi-media data, and is used for the audio and visual system. Therefore, care must be taken when handling the radio and display receiver assembly.
* When removing the hard disc drive, eliminate static electricity by touching the vehicle body to prevent components from being damaged.
2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL (for Radio and Display Type with Intuitive Parking Assist System)
NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.
3. REMOVE REAR CONSOLE BOX ASSEMBLY
Removal
4. REMOVE BOX BOTTOM MAT Removal
5. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY Removal
6. REMOVE CENTER INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY Removal
7. REMOVE NO. 2 INSTRUMENT PANEL REGISTER ASSEMBLY Removal
8. REMOVE RADIO RECEIVER ASSEMBLY WITH AIR CONDITIONING CONTROL ASSEMBLY (for Radio Receiver Type)
(a) Apply protective tape to the area shown in the illustration.
Text in Illustration
(b) Remove the 4 bolts.
(c) Pull the radio receiver assembly with air conditioning control assembly toward the rear of the vehicle and disengage the 8 clips.
(d) Disconnect each connector and remove the radio receiver assembly with air conditioning control assembly.
9. REMOVE RADIO RECEIVER ASSEMBLY WITH AIR CONDITIONING CONTROL ASSEMBLY (for Radio and Display Type)
(a) Apply protective tape to the area shown in the illustration.
Text in Illustration
(b) Remove the 4 bolts.
(c) Pull the radio receiver assembly with air conditioning control assembly toward the rear of the vehicle and disengage the 8 clips.
(d) Disconnect each connector and remove the radio receiver assembly with air conditioning control assembly.
HINT
w/ Navigation System:
Do not disconnect the extension module connector.
10. REMOVE NO. 1 RADIO BRACKET (for Radio Receiver Type)
(a) Remove the 5 screws and No. 1 radio bracket.
11. REMOVE NO. 2 RADIO BRACKET (for Radio Receiver Type)
(a) Remove the 5 screws and No. 2 radio bracket.
12. REMOVE NO. 1 RADIO BRACKET (for Radio and Display Type)
(a) w/o Navigation System:
(1) Remove the 5 screws and No. 1 radio bracket.
(b) w/ Navigation System:
(1) Remove the 7 screws and No. 1 radio bracket.
13. REMOVE NO. 2 RADIO BRACKET (for Radio and Display Type)
(a) w/o Navigation System:
(1) Remove the 5 screws and No. 2 radio bracket.
(b) w/ Navigation System:
(1) Remove the 7 screws and No. 2 radio bracket.
14. REMOVE NO. 1 RADIO RECEIVER BRACKET (for Radio and Display Type with Intuitive Parking Assist System)
(a) Remove the 5 screws and No. 1 radio receiver bracket.
15. REMOVE NO. 2 RADIO RECEIVER BRACKET (for Radio and Display Type with Intuitive Parking Assist System)
(a) Remove the 5 screws and No. 2 radio receiver bracket.
16. REMOVE AIR CONDITIONING CONTROL ASSEMBLY Removal
17. REMOVE EXTENSION MODULE (for Radio and Display Type)
w/ Navigation System: Removal
18. REMOVE RADIO RECEIVER ASSEMBLY (for Radio Receiver Type)
19. REMOVE RADIO AND DISPLAY RECEIVER ASSEMBLY (for Radio and Display Type)
20. REMOVE HARD DISK DRIVE (for Radio and Display Type with Intuitive Parking Assist System) Removal
21. REMOVE NAVIGATION ECU SUB-ASSEMBLY (for Radio and Display Type with Intuitive Parking Assist System)