Installation

PARKING BRAKE: PARKING BRAKE PEDAL: INSTALLATION

1. INSTALL PARKING BRAKE CONTROL PEDAL ASSEMBLY

(a) Install the parking brake control pedal assembly with the bolt and 2 nuts.





Torque : 15 Nm (153 kgf-cm, 11 ft-lbf)

NOTICE:
Tighten the bolt and 2 nuts in the order shown in the illustration.

(b) Connect the parking brake switch connector.

(c) Install the No. 1 parking brake cable assembly with the bolt and 2 nuts.





Bolt - Torque : 15 Nm (153 kgf-cm, 11 ft-lbf)

Nut - Torque : 5.4 Nm (55 kgf-cm, 48 in-lbf)

(d) Install the clip to the No. 1 parking brake cable assembly.

(e) Install the floor carpet.

(f) Temporarily install the lock nut.





Text in Illustration





HINT
After adjusting parking brake pedal travel, tighten the lock nut.

2. CONNECT NO. 4 PARKING BRAKE CABLE ASSEMBLY

(a) Connect the No. 4 parking brake cable assembly to the parking brake control pedal assembly as shown in the illustration.





Text in Illustration





Torque : 5.4 Nm (55 kgf-cm, 48 in-lbf)

3. INSTALL AIRBAG SENSOR ASSEMBLY Installation

4. INSTALL FLOOR CARPET BRACKET RH Installation

5. INSTALL NO. 1 INDOOR ELECTRICAL KEY ANTENNA ASSEMBLY (for Built-in Type Yaw Rate Sensor)

w/ Smart Key System: Installation

6. INSTALL YAW RATE SENSOR BRACKET (for Separate Type Yaw Rate Sensor) Installation

7. INSTALL NO. 3 INDOOR ELECTRICAL KEY ANTENNA ASSEMBLY (for Separate Type Yaw Rate Sensor)

w/ Smart Key System: Installation

8. INSTALL YAW RATE SENSOR (for Separate Type Yaw Rate Sensor) Installation

9. INSTALL LOWER NO. 1 INSTRUMENT PANEL AIRBAG ASSEMBLY Installation

10. INSTALL SHIFT LEVER SUPPORT

* for U660E

* for U760E Installation

11. ADJUST PARKING BRAKE PEDAL TRAVEL Adjustments

12. INSPECT BRAKE WARNING LIGHT Adjustments