Installation

NAVIGATION / MULTI INFO DISPLAY: HARD DISK DRIVE: INSTALLATION

1. PRECAUTION

NOTICE:
When installing the hard disk drive, eliminate static electricity by touching the vehicle body to prevent components from being damaged.

2. INSTALL HARD DISK DRIVE

(a) Insert the hard disk drive in the direction shown by the arrow in the illustration to install it.





NOTICE:
To reduce the chance of bending the pins, make sure to keep the hard disk drive straight when inserting it.

(b) Engage the 2 guides to temporarily install the cover.

(c) Install the cover with the 2 screws.

3. INSTALL NO. 2 RADIO RECEIVER BRACKET

HINT
Use the same procedure as for the No. 1 receiver radio bracket Installation.

4. INSTALL NAVIGATION RECEIVER ASSEMBLY WITH BRACKET Installation

5. INSTALL CENTER INSTRUMENT PANEL REGISTER ASSEMBLY Installation

6. INSTALL INSTRUMENT PANEL BOX ASSEMBLY Installation

7. INSTALL INTEGRATION CONTROL AND PANEL Installation

8. CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

9. INSTALL DECK FLOOR BOX RH Installation

10. INSTALL REAR DECK FLOOR BOX Installation

11. INSTALL NO. 1 DECK BOARD Installation

12. INSTALL NO. 2 DECK BOARD Installation

13. INSTALL DECK BOARD ASSEMBLY Installation

14. INSPECT HARD DISK DRIVE

Operation Check