Removal

LIGHTING (EXT): HEADLIGHT ASSEMBLY: REMOVAL

HINT
* Use the same procedure for the RH and LH sides.
* The procedure described below is for the LH side.

1. PRECAUTION

NOTICE:
After turning the power switch off, waiting time may be required before disconnecting the cable from the negative (-) auxiliary battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) auxiliary battery terminal notices before proceeding with work Service Precautions.

2. REMOVE DECK BOARD ASSEMBLY Removal

3. REMOVE NO. 1 DECK BOARD Removal

4. REMOVE NO. 2 DECK BOARD Removal

5. REMOVE REAR DECK FLOOR BOX Removal

6. REMOVE DECK FLOOR BOX RH Removal

7. DISCONNECT CABLE FROM NEGATIVE AUXILIARY BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

8. REMOVE FRONT BUMPER ASSEMBLY

Removal

9. REMOVE HEADLIGHT ASSEMBLY

(a) Remove the bolt and 2 screws.

(b) Using a screwdriver with its tip wrapped with protective tape, disengage the claw.

Text in Illustration

(d) Disconnect each connector and remove the headlight assembly.