Removal

TIRE PRESSURE MONITORING: TIRE PRESSURE WARNING ECU: REMOVAL

NOTICE:
When replacing the tire pressure warning ECU, read the transmitter IDs registered in the tire pressure warning ECU and make a note of them before removing the tire pressure warning ECU.

1. PRECAUTION

NOTICE:
After turning the power switch off, waiting time may be required before disconnecting the cable from the negative (-) auxiliary battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) auxiliary battery terminal notices before proceeding with work Service Precautions.

2. REMOVE DECK BOARD ASSEMBLY Removal

3. REMOVE NO. 1 DECK BOARD Removal

4. REMOVE NO. 2 DECK BOARD Removal

5. REMOVE REAR DECK FLOOR BOX Removal

6. REMOVE DECK FLOOR BOX RH Removal

7. DISCONNECT CABLE FROM AUXILIARY BATTERY NEGATIVE TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

8. REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY Removal

9. REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY Removal

10. REMOVE ECU INTEGRATION BOX RH Removal

11. REMOVE TIRE PRESSURE WARNING ECU

(a) Disengage the 2 claws to remove the tire pressure warning ECU from the ECU integration box RH.