Trunk / Liftgate Lock: Service and Repair

Rear Lid Lock

• If rear lid does not open, it can opened by hand via the emergency release - 1 - on lid lock - 2 -. Emergency release is accessed through an opening in the rear lid trim.

Removing

- Remove rear lid trim





- Disconnect harness connector - 4 - from lid lock - 2 -.

- Remove screws - 3 - and guide lid lock - 2 - downward out of lid.

Installing

- Guide lid lock - 2 - into lid and install screws - 3 -.





- Tightening specification for bolts - 3 -: 23 Nm

- Connect harness connector - 4 - to lid lock - 2 -.

Further installation is in reverse order of removal.

• Before the rear lid is closed, a function test of the unlocking components must be performed.