Front Subframe Mount

Subframe Mount

Engine mount





1. = 40 Nm + 90° (1/4 turn) additional turn1)

2. = 20 Nm + 90° (1/4 turn) additional turn1)

3. = 60 Nm + 90° (1/4 turn) additional turn1)

1) Replace

Transmission mount





A = 40 Nm + 90° (1/4 turn) additional turn1)
B = 60 Nm + 90° (1/4 turn) additional turn1)

1) Replace

Pendulum supports





• First install pendulum support at transmission and then at subframe.

A Strength category 8.8 = 40 Nm + 90° ( 1/4) additional turn 1)
A Strength category 10.9 = 50 Nm + 90° ( 1/4) additional turn 1)
B = 100 Nm + 90° (1/4 turn) additional turn1)

1) Replace

Removing First remove bolt - B -, then bolts - A -.

Installing: First fasten bolts - A -, then bolt - B -.