Input Shaft with 7 Lining Discs Overview

Input Shaft with 7 Lining Discs Overview


• Note the difference between input shafts with 6 and 7 lining discs. Refer to => [ Input Shaft, Servicing with 7 Lining Discs ] Input Shaft, Servicing with 7 Lining Discs.






1 Input Shaft Seal

• Removing and Installing, refer to => [ Input Shaft Seal ] Input Shaft Seal

2 Input Shaft Cover Circlip

• Replace with same thickness

3 Input Shaft Cover

• After removing the cover, the input shaft cover bearing A (input shaft ball bearing) must be replaced, refer to => [ Bearing A in Input Shaft Cover ] Bearing A in Input Shaft Cover

4 Pistons

• Check for wear, refer to => [ Diagnosis and Testing ] 01J,0AN Continuously Variable Transmission

5 Pressure Plate

• Check for wear, refer to => [ Diagnosis and Testing ] 01J,0AN Continuously Variable Transmission

6 Corrugated Spring Washer

7 Upper Adjustment Disc

• Determine thickness, refer to => [ Input Shaft with 7 Lining Discs, Adjusting with Air Gap Determination ] Input Shaft with 7 Lining Discs, Adjusting with Air Gap Determination

• Replace

8 Lining Disc

• Replace

• Quantity: 7

9 Outer Clutch Disc

• Replace

• Quantity: 6

10 Lower Adjustment Disc

• Replace

• Determine thickness, refer to => [ Input Shaft with 7 Lining Discs, Adjusting with Air Gap Determination ] Input Shaft with 7 Lining Discs, Adjusting with Air Gap Determination

11 Input Shaft Cylinder

• Check for wear, refer to => [ Diagnosis and Testing ] 01J,0AN Continuously Variable Transmission

12 O-ring

• Replace

13 Oil Pipe

• Check for wear, refer to => [ Diagnosis and Testing ] 01J,0AN Continuously Variable Transmission