Operation CHARM: Car repair manuals for everyone.
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Auxiliary Blower Motor Resistor Assembly Replacement



Auxiliary Blower Motor Resistor Assembly Replacement

Removal Procedure

1. Remove the left rear quarter trim panels.




2. Disconnect the electrical connector from the blower motor resistor.
3. Remove the retaining screws.
4. Remove the blower motor resistor from the blower case.

Installation Procedure




1. Install the blower motor resistor into the blower case.

Notice: Refer to Fastener Notice.

2. Install the retaining screws to the blower case.

Tighten the screws to 2 N.m (18 lb in).

3. Connect the electrical connector to the blower motor resistor.
4. Install the left rear quarter trim panels.