Operation CHARM: Car repair manuals for everyone.
Home >> Chevrolet >> 2007 >> Express 2500 V8-4.8L >> Repair and Diagnosis >> Steering and Suspension >> Steering >> Pitman Arm >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Pitman Arm: Service and Repair



Pitman Arm Replacement

Tools Required
* J 6632-01 Pitman Arm Puller
* J 29107-A Universal Pitman Arm Puller

Removal Procedure




1. Raise and suitable support the vehicle. Refer to Lifting and Jacking the Vehicle .
2. Remove the power steering gear.
3. Install the power steering gear into a vise.
4. Remove the pitman arm nut and washer.




5. Remove the pitman arm from the pitman shaft using J 6632-01 or J 29107-A .

Installation Procedure




1. Install the pitman arm to the power steering gear.
2. Align the marks made at the removal on the pitman arm and the pitman arm shaft.
Notice: Refer to Fastener Notice .

3. Install a new pitman arm washer and nut.

Tighten the nut to 250 N.m (184 lb ft).

4. Remove the power steering gear from the vise.
5. Install the power steering gear.
6. Lower the vehicle.
7. Check the wheel alignment. Refer to Measuring Wheel Alignment .

pro multis · About Operation CHARM