Operation CHARM: Car repair manuals for everyone.
Home >> Chevrolet >> 2007 >> Monte Carlo V8-5.3L >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Sensors and Switches - Computers and Control Systems >> Oil Pressure Sensor >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Oil Pressure Sensor: Service and Repair



Engine Oil Pressure Sensor and/or Switch Replacement

Tools Required

J 41712 Oil Pressure Sensor Socket

Removal Procedure




1. If necessary, remove the engine sight shield. Refer to Upper Intake Manifold Sight Shield Replacement.
2. Disconnect the oil pressure sensor electrical connector (4).




3. Using J 41712, remove the oil pressure sensor (706) and washer (707).

Installation Procedure




1. Apply sealant to the threads of the oil pressure sensor. Refer to Sealers, Adhesives, and Lubricants for the 3.9L engine.

Notice: Refer to Fastener Notice.

2. Using J 41712, install the oil pressure sensor (706) and washer (707).

Tighten the sensor to 35 N.m (26 lb ft).




3. Connect the oil pressure sensor electrical connector (4).
4. If necessary, install the engine sight shield. Refer to Upper Intake Manifold Sight Shield Replacement.

pro multis · About Operation CHARM