Fastener Tightening Specifications

Cylinder Head






1. Tighten the cylinder head bolts gradually and in the sequence shown.
2. Tighten the cylinder head bolts to 25 Nm (18 lb ft) and turn the bolts another 3 turns of 90 degrees using J 45059 or the KM-470-B.

Camshaft Bearing Cap






Tighten
Tighten the camshaft bearing cap bolts to 8Nm (71 lb in).

Intake Manifold






Tighten
Tighten the intake manifold retaining bolts and the nuts to 22 Nm (16 lb ft).

Exhaust Manifold






Tighten
Tighten the exhaust manifold retaining nuts to 22 Nm (16 lb ft).

Camshaft Gear/Sprocket

Tighten
Tighten the camshaft gear bolt to 50 Nm (37 lb ft). Turn another 60 degrees plus 15 degrees using the J 45059 or the KM-470-B