Assembly
Install Both Output Bearing Cups:
Install Piston Retainer Gasket:
Install Piston Retainer:
Install Retainer Attaching Screws:
Install Low/Reverse Clutch Piston:
To assemble the transaxle centerline, refer to the following procedures (Output Gear Bearing Adjustment, Transfer Shaft Bearing and Determining No. 4 Thrust plate Thickness - Input Shaft End Play).
Guide Bracket Disassembled:
Guide Bracket:
Pivot Shaft And Guide Bracket:
Install Guide Bracket Pivot Shaft:
Install Anchor Shaft And Plug:
CAUTION: When installing, be sure guide bracket and split sleeve touch the rear of the transaxle case.
Install Low/Reverse Piston Return Spring:
Low/Reverse Spring Compressor Tool:
Compressor Tool In Use:
Install Snap Ring:
Install Rear Carrier Bearing Cone:
Install Rear Carrier Assembly:
Install Output Gear Bearing Cone:
