Front Axle Service

On 1985---87 models, removal of the righthand shaft seal is the same as that of the lefthand shaft seal.
1. Remove axle assembly.
2. Remove axle housing cover and drain lubricant.
3. Remove axle shaft retaining clip, then the axle shaft.
4. Remove axle shaft seal using suitable screwdriver.
5. Install replacement axle shaft seal using Installer J-29152 for righthand side axle shaft and Installer J-29154 for left hand side axle shaft.
6. Install axle shaft, then the axle shaft retaining clip.
7. Apply suitable sealant to axle housing cover and install cover. Torque cover bolts to 20 ft-lbs.
8. Fill axle with 21-2 pints of SAE 85W-90 lubricant, then install assembly onto vehicle. Refer to Axle, Installation for procedures.