Cruise Control Switch: Testing and Inspection

MAIN SWITCH TEST

Fig. 46 Main Cluster Switch Assembly Removal:

Fig. 47 Speed Control Main Switch Test:

1. Remove main cluster switch, then operate switch and check continuity across terminal as shown.
2. Ensure battery voltage is present between terminal four and ground, and that indicator lamp comes On when main switch is turned On with terminal two connected to battery positive and terminal six is connected to terminal six.
3. Ensure no battery voltage between terminal four and ground is present when main switch is turned Off.

CRUISE CONTROL SWITCH TEST
1. Remove steering wheel horn pad.

Fig. 48 Cruise Control Switch Test:

2. Measure resistance between terminals as shown. If resistance is not as specified, replace switch.