Operation CHARM: Car repair manuals for everyone.
Home >> Eagle >> 1995 >> Summit Wagon AWD L4-2350cc 2.4L SOHC >> Repair and Diagnosis >> Transmission and Drivetrain >> Automatic Transmission/Transaxle >> Service and Repair >> Overhaul >> Transfer Case Sub Assembly >> Assembly
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Assembly







A. TAPER ROLLER BEARINGS INSTALLATION

Using the special tools, install the taper roller bearing.




B DRIVE BEVEL GEAR INSTALLATION

1. Match the mating marks of the drive bevel gear and the drive bevel gear shaft to assemble.




C. OIL SEAL INSTALLATION

Using the special tool, install the oil seal.








D. SPACER(S) SELECTION

1. First: install the spacers used up to this time and then assemble the transfer case sub-assembly.

2. Using the special tool, measure the rotating drive torque of the drive bevel gear and select spacer(s) so it reaches the standard value.

Standard value: 1.7 - 2.5 Nm (1.23- 1.81 ft.lbs.) Caution

Select spacers of nearly same thickness on both sides.

E. DRIVE BEVEL GEAR SHAFT INSTALLATION

1. Install the transfer case and the drive bevel gear assembly and match the mating marks of the transfer case and the drive bevel gear shaft.
pro multis · About Operation CHARM