Manuals through 2025 now available!
Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.
LEMON is the spiritual successor to CHARM, I recommend you try it!
Link:
lemon-manuals.la or
lemon-manuals.org.ua
(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)
Or, hide this message:
temporarily or
permanently
Fitting Pistons
The
piston and cylinder wall must be clean and dry. Piston diameter should be measured 90 degrees to
piston pin at size location shown. Cylinder bores should be measured halfway down the cylinder bore and transverse to the engine
crankshaft center line shown. Refer to specifications. Pistons and cylinder bores should be measured at normal room temperature,
70°F (21°C).
