Installation

CAUTION: Keep the 0-ring free of oil or grease.

Fig. 18 Water Pump Body:

Fig. 17 Water Pump:

INSTALLATION
1. Install new 0-ring in pump body groove.
2. Install pump to chain case cover. Torque screws to 12 Nm (105 in.lbs.).
3. Rotate pump by hand to check for freedom of movement.
4. Position pulley on pump. Install screws and torque to 30 Nm (250 in.lbs.).

Fig. 29 Accessory Drive:

Fig. 30 Alternator/Power Steering And Water Pump Drive Belt Adjustment:

5. Install drive belt.
6. Refill Cooling System. See Cooling System/Service and Repair for procedure.
Service and Repair