A7 - Check FEPS Circuit For Short To Power
*** THIS ARTICLE REFLECTS CHANGES MADE BY TSB # 945B16, March 1994
- Key Off.
- Key On, Engine Off.
- Measure voltage between Pin 13 at the Data Link Connector and battery negative post.
- Is voltage greater than 9.0 volts?
YES -- SERVICE short to power. REMOVE breakout box. RECONNECT all components. Rerun quick test. Diagnostic Subroutines (DSR) - Extracting Codes
NO -- Go to A8. A8 - Check For Spark At The Plugs