Throttle Position Sensor: Description and Operation

Typical Throttle Position Sensor (TPS) Wiring:

The Throttle Position Sensor (TPS), is mounted on the side of the throttle body opposite the throttle lever assembly. Its' function is to sense the current throttle valve position and relay that information to the control module. Throttle position information allows the control module to generate the required injector control signals (base pulse).
If the TPS senses a wide open throttle, a voltage signal indicating this condition is sent to the control module. The control module then increases the injector pulse width, permitting increased fuel flow.
As the throttle valve rotates in response to movement of the accelerator pedal, the throttle shaft transfers this rotation to the TPS. A potentiometer (variable resistor) within the TPS assembly changes its resistance (and voltage drop) in proportion to throttle movement.
By applying a reference voltage (5.0 volts) to the TPS input, a varying voltage (reflecting throttle position) is available at the TPS output. For example, approximately 2.5 volts results from a 50% throttle valve opening (depending on TPS calibration). The voltage output from the TPS assembly is routed to the control module for use in determining throttle position.