Operation CHARM: Car repair manuals for everyone.
Home >> GMC >> 2009 >> Yukon Denali AWD V8-6.2L >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Variable Valve Timing Actuator >> Service and Repair >> Camshaft Position Actuator Magnet Replacement
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Camshaft Position Actuator Magnet Replacement




Camshaft Position Actuator Magnet Replacement

Removal Procedure




1. Remove the water pump. Refer to Water Pump Replacement (RPOs LY6, L76, L02) ()Water Pump Replacement (RPOs LY2, LC9, LY5, LMG, LFA) ().
2. Disconnect the engine harness electrical connector from the camshaft position (CMP) actuator magnet.
3. Remove the CMP actuator magnet bolts (751) and magnet (752).
4. Remove and discard the CMP actuator magnet gasket (753).

Installation Procedure





Note: The gasket surface should be free of oil or other foreign material during assembly.

1. Install a NEW CMP actuator magnet gasket (753) onto the CMP actuator magnet.
2. Install the CMP actuator magnet (752) to the front cover.

Caution: Refer to Fastener Caution (Fastener Caution).

3. Install the CMP actuator magnet bolts (751) and tighten to 12 Nm(106 lb in).
4. Connect the engine harness electrical connector to the CMP actuator magnet.
5. Install the water pump. Refer to Water Pump Replacement (RPOs LY6, L76, L02) ()Water Pump Replacement (RPOs LY2, LC9, LY5, LMG, LFA) ().

pro multis · About Operation CHARM