Operation CHARM: Car repair manuals for everyone.
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Roof Identification Lamp Bulb Replacement



ROOF IDENTIFICATION LAMP BULB REPLACEMENT

REMOVAL PROCEDURE




1. Remove the 6 fastener covers (1) by inserting a flat-head screwdriver into the slot on the passenger's side of each cover and gently lifting upward.
2. Using a T25(R) torx driver, loosen the 6 bolts under the fastener covers.
3. Rotate lightbar back so that lightbar is laying upside down on roof. Remove the bulb socket from lamp assembly by rotating the bulb socket 1/4 turn counterclockwise.
4. Pull the bulb out of the socket.
5. Replace bulb.

INSTALLATION PROCEDURE
1. Install the bulb socket into the lamp assembly by rotating the bulb socket 1/4 turn clockwise.
2. Rotate lightbar to correct orientation and install the bolts using the T25 torx driver.

NOTE: Refer to Fastener Notice.

4.5 N.m (30 lb in).

3. Install the 6 fastener covers by aligning the tab to driver's side and gently pressing in place.