Operation CHARM: Car repair manuals for everyone.
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Transmission Speed Sensor: Service and Repair



Vehicle Speed Sensor (VSS) Replacement

Removal Procedure
1. Raise and support the vehicle.





2. Disconnect the vehicle speed sensor (VSS) electrical connector (2).





3. Remove the VSS with O-ring seal.

Installation Procedure





Notice: Refer to Component Fastener Tightening Notice in Service Precautions.

1. Install the VSS with O-ring seal.
^ Tighten the vehicle speed sensor (VSS) to 17 Nm (13 ft. lbs.).





2. Connect the VSS electrical connector (2).
3. Lower the vehicle.