Manuals through 2025 now available!
Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.
LEMON is the spiritual successor to CHARM, I recommend you try it!
Link:
lemon-manuals.la or
lemon-manuals.org.ua
(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)
Or, hide this message:
temporarily or
permanently
Crankshaft Position Sensor: Testing and Inspection
Crank Angle Sensor:
Crank Angle Sensor Testing:
1.
Remove sensor and measure resistance across terminals:
0.95 - 1.23K ohms @ 68°F (20°C) 2.
If not as specified, replace sensor.
3.
On installation, check sensor to sensor plate clearance with feeler gauge:
0.039 - 0.078 in (1.0 - 2.0 mm)
