NO.5 WRENCH INDICATOR LIGHT ILLUMINATES/MESSAGE "Drain Water from Fuel Filter" IS INDICATED IN TFT LCD [SKYACTIV-D 2.2]

id0103g1879000

5

WRENCH INDICATOR LIGHT ILLUMINATES/MESSAGE “Drain Water from Fuel Filter” IS INDICATED IN TFT LCD

DESCRIPTION

•  “Drain Water from Fuel Filter” is displayed in the TFT LCD. (with TFT LCD)

•  Wrench indicator light illuminates. (without TFT LCD)

POSSIBLE CAUSE

•  PCM DTC is stored.

•  Sedimentor switch malfunction

•  Instrument cluster malfunction

5	WRENCH INDICATOR LIGHT ILLUMINATES/MESSAGE “Drain Water from Fuel Filter” IS INDICATED IN TFT LCD
DESCRIPTION	• “Drain Water from Fuel Filter” is displayed in the TFT LCD. (with TFT LCD) • Wrench indicator light illuminates. (without TFT LCD)
POSSIBLE CAUSE	• PCM DTC is stored. • Sedimentor switch malfunction • Instrument cluster malfunction

Diagnostic Procedure

STEP

INSPECTION

RESULTS

ACTION

1

VERIFY PCM DTC

•  Retrieve PCM DTCs using the M-MDS.
(See ON-BOARD DIAGNOSTIC TEST [SKYACTIV-D 2.2].)

•  Are any DTCs present?

Yes

Go to the applicable DTC inspection.

(See DTC TABLE [SKYACTIV-D 2.2].)

No

Go to the next step.

2

INSPECT SEDIMENTOR SWITCH

•  Inspect the sedimentor switch.
(See SEDIMENTOR SWITCH INSPECTION [SKYACTIV-D 2.2].)

•  Is the sedimentor switch normal?

Yes

Go to the next step.

No

Replace the fuel filter, then go to Step 4.

(See FUEL FILTER REMOVAL/INSTALLATION [SKYACTIV-D 2.2].)

3

INSPECT INSTRUMENT CLUSTER

•  Inspect the instrument cluster.
(See INSTRUMENT CLUSTER INSPECTION.)

•  Is the instrument cluster normal?

Yes

Go to the next step.

No

Replace the instrument cluster, then go to the next step.

(See INSTRUMENT CLUSTER REMOVAL/INSTALLATION.)

4

Verify the test results.

•  If normal, return to the diagnostic index to service any additional symptoms.
(See SYMPTOM DIAGNOSTIC INDEX [SKYACTIV-D 2.2].)

•  If a malfunction remains, inspect the related Service Information and perform the repair or diagnosis.

―  If the vehicle is repaired, troubleshooting is completed.

―  If the vehicle is not repaired or additional diagnostic information is not available, replace the PCM.
(See PCM REMOVAL/INSTALLATION [SKYACTIV-D 2.2].)

STEP	INSPECTION	RESULTS	ACTION
1	VERIFY PCM DTC • Retrieve PCM DTCs using the M-MDS. (See ON-BOARD DIAGNOSTIC TEST [SKYACTIV-D 2.2].) • Are any DTCs present?	Yes	Go to the applicable DTC inspection. (See DTC TABLE [SKYACTIV-D 2.2].)
1		No	Go to the next step.
2	INSPECT SEDIMENTOR SWITCH • Inspect the sedimentor switch. (See SEDIMENTOR SWITCH INSPECTION [SKYACTIV-D 2.2].) • Is the sedimentor switch normal?	Yes	Go to the next step.
2		No	Replace the fuel filter, then go to Step 4. (See FUEL FILTER REMOVAL/INSTALLATION [SKYACTIV-D 2.2].)
3	INSPECT INSTRUMENT CLUSTER • Inspect the instrument cluster. (See INSTRUMENT CLUSTER INSPECTION.) • Is the instrument cluster normal?	Yes	Go to the next step.
3		No	Replace the instrument cluster, then go to the next step. (See INSTRUMENT CLUSTER REMOVAL/INSTALLATION.)
4	Verify the test results. • If normal, return to the diagnostic index to service any additional symptoms. (See SYMPTOM DIAGNOSTIC INDEX [SKYACTIV-D 2.2].) • If a malfunction remains, inspect the related Service Information and perform the repair or diagnosis. ― If the vehicle is repaired, troubleshooting is completed. ― If the vehicle is not repaired or additional diagnostic information is not available, replace the PCM. (See PCM REMOVAL/INSTALLATION [SKYACTIV-D 2.2].)