NO. 1 THE AUTO OPEN FUNCTION ON THE DRIVER'S SIDE AND PASSENGER'S SIDE POWER WINDOW IS INOPERATIVE

1	The auto open function on the driver's side and passenger's side power window is inoperative
POSSIBLE CAUSE	• No power supply to power window main switch • Power window main switch malfunction (power window control unit malfunction, auto switch malfunction) • Power window motor malfunction • Malfunction in wiring harness between power window motor and power window main switch


STEP	INSPECTION		ACTION
1	• Turn the ignition switch to the ON position. • Operate driver and passenger side power window using automatic open function on the power window main switch. • Do each side power window open normally?	Yes	The power window system is normal.
1		No	Automatic open function does not operate both sides: Go to the next step. Automatic open function does not operate both sides: Go to Step 4.
2	• Turn the ignition switch to ON position. • Measure the voltage between power window main switch following terminal and ground. - Terminal B • Is the voltage B+?	Yes	Go to the next step.
2		No	Repair or replace for open circuit.
3	• Turn the ignition switch to LOCK position. • Disconnect the power window main switch connector. • Verify that the continuity between following power window main switch terminal and ground. - Terminal G • Is there continuity?	Yes	Inspect the power window main switch. (See POWER WINDOW MAIN SWITCH INSPECTION [EXCEPT POWER RETRACTABLE HARDTOP].) (See POWER WINDOW MAIN SWITCH INSPECTION [POWER RETRACTABLE HARDTOP].) Replace the power window main switch if necessary.
3		No	Repair or replace for open circuit.
4	• Turn the ignition switch to ON position. • Operate suspected side power window using manual open function on the power window main switch. • Do suspected side power window open normally?	Yes	Replace the power window main switch. (Power window control unit malfunction. (See POWER WINDOW MAIN SWITCH INSPECTION [EXCEPT POWER RETRACTABLE HARDTOP].) (See POWER WINDOW MAIN SWITCH INSPECTION [POWER RETRACTABLE HARDTOP].)
4		No	Go to the next step.
5	• Turn the ignition switch to LOCK position. • Disconnect the power window main switch and suspected side power window motor connector. • Inspect for poor connection (such as damaged/ pulled-out pins, corrosion etc.) • Is there any malfunction?	Yes	Go to the next step.
5		No	Repair or replace malfunctioning part.
6	• :Inspect for open or short circuit in wiring harness between suspected side power window motor and power window main switch. L.H.D. model driver's side: - Terminal I (main switch) - terminal G (motor) - Terminal J (main switch) - terminal A (motor) L.H.D. model passenger's side: - Terminal D (main switch) - terminal G (motor) - Terminal F (main switch) - terminal A (motor) R.H.D. model driver's side: - Terminal D (main switch) - terminal G (motor) - Terminal F (main switch) - terminal A (motor) R.H.D. model passenger's side: - Terminal I (main switch) - terminal G (motor) - Terminal J (main switch) - terminal A (motor) • Is the open or short circuit detected?	Yes	Repair or replace for open or short circuit.
6		No	Go to the next step.
7	• Inspect suspected side power window motor. (See POWER WINDOW MOTOR INSPECTION.) • Is the power window motor normal?	Yes	Replace the power window main switch.Replace the power window main switch. (power window control unit malfunction, auto switch malfunction) (See POWER WINDOW MAIN SWITCH INSPECTION [EXCEPT POWER RETRACTABLE HARDTOP].) (See POWER WINDOW MAIN SWITCH INSPECTION [POWER RETRACTABLE HARDTOP].)
7		No	Replace the power window motor. (See POWER WINDOW REGULATOR REMOVAL/INSTALLATION.)