DOOR HINGE REMOVAL/INSTALLATION
id091100620900
1. Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION.)
2. Remove the wiper arm and blade. (See WIPER ARM AND BLADE REMOVAL/INSTALLATION.)
3. Disconnect washer hose B from joint pipe A. (See WASHER HOSE REMOVAL/INSTALLATION.)
4. Remove the following parts:
- (1) Front bumper (See FRONT BUMPER REMOVAL.) (See FRONT BUMPER INSTALLATION.)
- (2) Front bumper slider (See FRONT BUMPER SLIDER REMOVAL/INSTALLATION.)
- (3) Front combination light (See FRONT COMBINATION LIGHT REMOVAL/INSTALLATION.)
- (4) Cowl grille (See COWL GRILLE REMOVAL/INSTALLATION.)
- (5) Side step molding (See SIDE STEP MOLDING REMOVAL.) (See SIDE STEP MOLDING INSTALLATION.)
- (6) Door (See DOOR REMOVAL/INSTALLATION.)
- (7) Front fender insulator (See FRONT FENDER INSULATOR REMOVAL/INSTALLATION.)
- (8) Front fender panel (See FRONT FENDER PANEL REMOVAL/INSTALLATION.)
5. Remove the bolts.
6. Remove the door hinges.
7. Install in the reverse order of removal.
8. Adjust the door. (See DOOR ADJUSTMENT.)
