CLIMATE CONTROL UNIT REMOVAL/INSTALLATION [FULL-AUTO AIR CONDITIONER]
id0740a1807400
1. Disconnect the negative battery cable.
2. Remove the following parts:
- (1) Glove compartment (See GLOVE COMPARTMENT REMOVAL/INSTALLATION.)
- (2) Glove compartment cover (See GLOVE COMPARTMENT COVER REMOVAL/INSTALLATION.)
- (3) Shift lever knob (MTX) (See MANUAL TRANSAXLE SHIFT MECHANISM REMOVAL/INSTALLATION [F35M-R].) (See MANUAL TRANSAXLE SHIFT MECHANISM REMOVAL/INSTALLATION [B65M-R].)
- (4) Boot panel (See FRONT CONSOLE COMPONENT DISASSEMBLY/ASSEMBLY.)
- (5) Side wall (See SIDE WALL REMOVAL/INSTALLATION.)
- (6) Front console (See FRONT CONSOLE COMPONENT REMOVAL/INSTALLATION.)
- (7) Center panel unit (with audio) (See CENTER PANEL UNIT REMOVAL/INSTALLATION.)
- (8) Center panel (without audio) (See CENTER PANEL REMOVAL/INSTALLATION.)
3. Remove in the order indicated in the table.
|
1
|
Climate control unit
|
|
2
|
Connector
|
4. Install in the reverse order of removal.
