REAR SEAT BACK STRIKER REMOVAL/INSTALLATION

id091300426400

1.  Disconnect the negative battery cable.

2.  Remove the rear scuff plate. (See REAR SCUFF PLATE REMOVAL/INSTALLATION.)

3.  Remove the rear seat back. (See REAR SEAT BACK REMOVAL/INSTALLATION.)

4.  Remove the rear seat cushion. (See REAR SEAT CUSHION REMOVAL/INSTALLATION.)

5.  Remove the trunk end trim. (See TRUNK END TRIM REMOVAL/INSTALLATION.)

6.  Remove the trunk side trim. (See TRUNK SIDE TRIM REMOVAL/INSTALLATION.) (See TRUNK SIDE TRIM REMOVAL/INSTALLATION [3HB])

7.  C-pillar trim (See C-PILLAR TRIM REMOVAL/INSTALLATION) (See C-PILLAR TRIM REMOVAL/INSTALLATION [3HB])

8.  Remove the bolts, then remove the rear seat back striker in the direction of the arrow shown in the figure.

am2zzw00002221

9.  Install in the reverse order of removal.