DTC B2477 [INFORMATION DISPLAY/MULTI INFORMATION DISPLAY]

id0902k0935800

DESCRIPTION

Information display/multi information display configuration error
DETECTION CONDITION
•  Information display/multi information display configuration has not been performed.
POSSIBLE CAUSE
•  Information display/multi information display configuration error
•  Information display/multi information display malfunction

Diagnostic Procedure

STEP

INSPECTION

ACTION
1
PERFORM INFORMATION DISPLAY/MULTI INFORMATION DISPLAY CONFIGURATION
•  Perform the “INFORMATION DISPLAY/MULTI INFORMATION DISPLAY CONFIGURATION” using the M-MDS.
•  Clear the DTC from information display/multi information display using the M-MDS.
•  Switch the ignition to ACC.
•  Perform the “DTC INSPECTION”.
•  Is the same DTC present?
Yes
Perform the “INFORMATION DISPLAY/MULTI INFORMATION DISPLAY CONFIGURATION” again, then go to the next step.
(See INFORMATION DISPLAY/MULTI INFORMATION DISPLAY CONFIGURATION.)
No
Go to Step 3.
2
VERIFY TROUBLESHOOTING COMPLETED
•  Clear the DTC from information display/multi information display using the M-MDS.
•  Switch the ignition to ACC.
•  Perform the “DTC INSPECTION”.
•  Is the same DTC present?
Yes
Replace the information display/multi information display, then go to the next step.
(See INFORMATION DISPLAY REMOVAL/INSTALLATION.)
(See MULTI INFORMATION DISPLAY REMOVAL/INSTALLATION.)
No
Go to the next step.
3
VERIFY THAT NO OTHER DTCs ARE PRESENT
•  Are any DTCs present?
Yes
Go to the applicable DTC inspection.
(See DTC TABLE [INFORMATION DISPLAY/MULTI INFORMATION DISPLAY].)
No
DTC troubleshooting completed.