LIFTGATE LOCK ACTUATOR INSPECTION

id091400512100

1.  Disconnect the negative battery cable.

2.  Remove the following parts

(1)  Liftgate upper trim (See LIFTGATE UPPER TRIM REMOVAL/INSTALLATION.)

(2)  Liftgate side trim (See LIFTGATE SIDE TRIM REMOVAL/INSTALLATION.)

(3)  Liftgate lower trim (See LIFTGATE LOWER TRIM REMOVAL/INSTALLATION.)

(4)  Liftgate latch and lock actuator (See LIFTGATE LATCH AND LOCK ACTUATOR REMOVAL/INSTALLATION.)

3.  Press the latch in using a flathead screwdriver to inspect the latch lever condition.

am3uuw00004543

4.  Apply battery positive voltage to each terminal, and then verify the operation.

am3uuw00004544

•  If not as indicated in the table, replace the liftgate latch and lock actuator.

Lock actuator operation	Terminal
	+	-
RELEASE	D	B