BACK-UP LIGHT SWITCH INSPECTION

id091800800300

A26M-R

1.  Disconnect the negative battery cable.

2.  Disconnect the back-up light switch connector. (See BACK-UP LIGHT SWITCH REMOVAL/INSTALLATION [A26M-R].)

3.  Verify that the continuity between the back-up light switch terminals is as indicated in the table.

am3zzw00009838

•  If not as indicated in the table, replace the back-up light switch.

am3zzw00009839

G66M-R

1.  Remove the battery cover. (See BATTERY REMOVAL/INSTALLATION [LF, L5].) (See BATTERY REMOVAL/INSTALLATION [MZR 2.0 DISI i-stop].)

2.  Disconnect the negative battery cable. (See BATTERY REMOVAL/INSTALLATION [LF, L5].) (See BATTERY REMOVAL/INSTALLATION [MZR 2.0 DISI i-stop].)

3.  Remove the battery component. (ex: battery, battery tray and PCM component) (See BATTERY REMOVAL/INSTALLATION [LF, L5].) (See BATTERY REMOVAL/INSTALLATION [MZR 2.0 DISI i-stop].)

4.  Remove the aerodynamic under cover No.2. (See AERODYNAMIC UNDER COVER NO.2 REMOVAL/INSTALLATION.)

5.  Disconnect the back-up light switch connector. (See BACK-UP LIGHT SWITCH REMOVAL/INSTALLATION [G66M-R].)

6.  Verify that the continuity between the back-up light switch terminals is as indicated in the table.

am3zzw00009838

•  If not as indicated in the table, replace the back-up light switch.

am3zzw00009839

F35M-R

1.  Remove the battery cover. (See BATTERY REMOVAL/INSTALLATION [ZY, Z6].)

2.  Disconnect the negative battery cable. (See BATTERY REMOVAL/INSTALLATION [ZY, Z6].)

3.  Remove the aerodynamic under cover No.2. (See AERODYNAMIC UNDER COVER NO.2 REMOVAL/INSTALLATION.)

4.  Disconnect the back-up light switch connector. (See BACK-UP LIGHT SWITCH REMOVAL/INSTALLATION [F35M-R].)

5.  Verify that the continuity between the back-up light switch terminals is as indicated in the table.

am3zzw00009924

•  If not as indicated in the table, replace the back-up light switch.

am3zzw00009839

J65M-R

1.  Remove the battery cover. (See BATTERY REMOVAL/INSTALLATION [MZ-CD 1.6 (Y6)].)

2.  Disconnect the negative battery cable. (See BATTERY REMOVAL/INSTALLATION [MZ-CD 1.6 (Y6)].)

3.  Remove the air cleaner. (See INTAKE-AIR SYSTEM REMOVAL/INSTALLATION [MZ-CD 1.6 (Y6)].)

4.  Disconnect the back-up light switch connector. (See BACK-UP LIGHT SWITCH REMOVAL/INSTALLATION [J65M-R].)

5.  Verify that the continuity between the back-up light switch terminals is as indicated in the table.

am3zzw00009925

•  If not as indicated in the table, replace the back-up light switch.

am3zzw00009839

B76M-R

1.  Disconnect the negative battery cable.

2.  Remove the air cleaner component. (ex: air cleaner, air hose) (See INTAKE-AIR SYSTEM REMOVAL/INSTALLATION [MZ-CD 1.6 (Y6)].)

3.  Disconnect the back-up light switch connector. (See BACK-UP LIGHT SWITCH REMOVAL/INSTALLATION [B76M-R].)

4.  Verify that the continuity between the back-up light switch terminals is as indicated in the table.

am3zzw00009925

•  If not as indicated in the table, replace the back-up light switch.

am3zzw00009839