REAR HEAT DUCT REMOVAL/INSTALLATION
id071100800900
1. Disconnect the negative battery cable.
2. Remove the following parts:
- (1) Front seat (See FRONT SEAT REMOVAL/INSTALLATION.)
- (2) Audio amplifier (Bose®) (See AUDIO AMPLIFIER REMOVAL/INSTALLATION.)
- (3) Woofer (Bose®) (See WOOFER REMOVAL/INSTALLATION.)
- (4) Front scuff plate (See FRONT SCUFF PLATE REMOVAL/INSTALLATION.)
- (5) Console (See CONSOLE REMOVAL/INSTALLATION.)
- (6) Front side trim (See FRONT SIDE TRIM REMOVAL/INSTALLATION.)
- (7) Rear scuff plate (See REAR SCUFF PLATE REMOVAL/INSTALLATION.)
- (8) B-pillar lower trim (See B-PILLAR LOWER TRIM REMOVAL/INSTALLATION.)
- (9) Fuel-filler lid opener lever cover (See FUEL-FILLER LID OPENER REMOVAL/INSTALLATION [L.H.D.].) (See FUEL-FILLER LID OPENER REMOVAL/INSTALLATION [R.H.D.].)
- (10) Floor covering (See FLOOR COVERING REMOVAL/INSTALLATION.)
3. Remove in the order indicated in the table.
|
1
|
Fastener
|
|
2
|
Rear heat duct (1)
|
|
3
|
Rear heat duct (2)
|
|
4
|
Rear heat duct (3)
|
4. Install in the reverse order of removal.
