POWER WINDOW MAIN SWITCH REMOVAL/INSTALLATION

id091200801900

1.  Disconnect the negative battery cable. (See BATTERY REMOVAL/INSTALLATION [MZR 2.0, MZR 2.5].) (See BATTERY REMOVAL/INSTALLATION [MZR 2.3 DISI Turbo].) (See BATTERY REMOVAL/INSTALLATION [MZR 2.0 DISI i-stop].) (See BATTERY REMOVAL/INSTALLATION [MZ-CD 1.6].) (See BATTERY REMOVAL/INSTALLATION [MZR-CD 2.2].) (See BATTERY REMOVAL/INSTALLATION [SKYACTIV-G 2.0].) (See BATTERY REMOVAL/INSTALLATION [MZR 1.5, MZR 1.6].)

2.  Remove the inner garnish. (driver's side) (See INNER GARNISH REMOVAL/INSTALLATION.)

3.  Remove the front door trim. (driver's side) (See FRONT DOOR TRIM REMOVAL/INSTALLATION.)

4.  Remove the power window main switch. (See FRONT DOOR TRIM DISASSEMBLY/ASSEMBLY.)

5.  Install in the reverse order of removal.