WASHER FLUID-LEVEL SENSOR REMOVAL/INSTALLATION


id091900801800

1.  Disconnect the negative battery cable. (See BATTERY REMOVAL/INSTALLATION [MZR 2.0, MZR 2.5].) (See BATTERY REMOVAL/INSTALLATION [MZR 2.3 DISI Turbo].) (See BATTERY REMOVAL/INSTALLATION [MZR 2.0 DISI i-stop].) (See BATTERY REMOVAL/INSTALLATION [MZ-CD 1.6].) (See BATTERY REMOVAL/INSTALLATION [MZR-CD 2.2].) (See BATTERY REMOVAL/INSTALLATION [MZR 1.5, MZR 1.6].) (See BATTERY REMOVAL/INSTALLATION [SKYACTIV-G 2.0].)

2.  Remove the front bumper. (See FRONT BUMPER REMOVAL/INSTALLATION.)

3.  Remove the washer tank. (See WASHER TANK REMOVAL/INSTALLATION.)

4.  Remove the connector of the washer fluid-level sensor from the washer tank.

am3zzw00009759

5.  Remove the washer fluid-level sensor.

6.  Remove the grommet.

7.  Install in the reverse order of removal.