REAR VEHICLE MONITORING BRACKET REMOVAL/INSTALLATION

id092200014900

1.  Disconnect the negative battery cable.

(See BATTERY REMOVAL/INSTALLATION [MZR 2.0, MZR 2.5].)

(See BATTERY REMOVAL/INSTALLATION [MZR 2.3 DISI Turbo].)
(See BATTERY REMOVAL/INSTALLATION [MZR 2.0 DISI i-stop].)
(See BATTERY REMOVAL/INSTALLATION [MZ-CD 1.6].)
(See BATTERY REMOVAL/INSTALLATION [MZR-CD 2.2].)
(See BATTERY REMOVAL/INSTALLATION [SKYACTIV-G 2.0].)
(See BATTERY REMOVAL/INSTALLATION [MZR 1.5, MZR 1.6].)

2.  Remove the rear combination light. (See REAR COMBINATION LIGHT REMOVAL/INSTALLATION.)

3.  Remove the rear bumper. (See REAR BUMPER REMOVAL/INSTALLATION.)

4.  Remove the rear vehicle monitoring control module. (See REAR VEHICLE MONITORING CONTROL MODULE REMOVAL/INSTALLATION.)

5.  Remove the nuts.

am3zzw00006179

6.  Remove the rear vehicle monitoring bracket.

7.  Install in the reverse order of removal.

8.  Perform radar aiming. (See REAR VEHICLE MONITORING RADAR AIMING.)