DTC U0415:68 [INSTRUMENT CLUSTER]
id0902e8989000
|
DESCRIPTION |
Signal error from ABS HU/CM or DSC HU/CM |
|---|---|
|
DETECTION CONDITION
|
• Instrument cluster cannot receive the correct data from the ABS HU/CM or DSC HU/CM.
|
|
POSSIBLE CAUSE
|
• ABS HU/CM or DSC HU/CM malfunction
• Instrument cluster malfunction
|
Diagnostic Procedure
|
STEP |
INSPECTION |
ACTION |
|
|---|---|---|---|
|
1
|
VERIFY ABS HU/CM OR DSC HU/CM DTCs
• Verify the ABS HU/CM or DSC HU/CM DTCs using the M-MDS.
(See ON-BOARD DIAGNOSIS [ABS].)
• Are any DTCs present?
|
Yes
|
Go to the applicable DTC inspection.
(See ON-BOARD DIAGNOSIS [ABS].)
|
|
No
|
Go to the next step.
|
||
|
2
|
VERIFY ABS HU/CM OR DSC HU/CM MALFUNCTION
• Clear the DTC from the instrument cluster using the M-MDS.
• Switch the ignition to ON and wait for 20 s or more.
• Verify the instrument cluster DTC using the M-MDS.
• Is the same DTC present?
|
Yes
|
Replace the ABS HU/CM or DSC HU/CM, then go to the next step.
|
|
No
|
Go to Step 4.
|
||
|
3
|
VERIFY TROUBLESHOOTING COMPLETED
• Clear the DTC from the instrument cluster using the M-MDS.
• Switch the ignition to ON and wait for 20 s or more.
• Verify the instrument cluster DTC using the M-MDS.
• Is the same DTC present?
|
Yes
|
Replace the instrument cluster, then go to the next step.
|
|
No
|
Go to the next step.
|
||
|
4
|
VERIFY THAT NO OTHER DTCs ARE PRESENT
• Are any DTCs present?
|
Yes
|
Go to the applicable DTC inspection.
|
|
No
|
DTC troubleshooting completed.
|
||