REQUEST SWITCH REMOVAL/INSTALLATION [ADVANCED KEYLESS ENTRY AND PUSH BUTTON START SYSTEM]

id0914004400z3

Note

•  The request switches are built into the front outer handles. (See FRONT OUTER HANDLE REMOVAL/INSTALLATION.)

am2zzw00000545

WGN

1.  Disconnect the negative battery cable.

2.  Remove the following parts:

(1)  Liftgate upper trim (See LIFTGATE UPPER TRIM REMOVAL/INSTALLATION.)

(2)  Liftgate side trim (See LIFTGATE SIDE TRIM REMOVAL/INSTALLATION.)

(3)  Recess (See RECESS REMOVAL/INSTALLATION.)

(4)  Liftgate lower trim (See LIFTGATE LOWER TRIM REMOVAL/INSTALLATION.)

(5)  Liftgate garnish (See LIFTGATE GARNISH REMOVAL/INSTALLATION.)

3.  Remove the request switch in the direction of the arrow (2) shown in the figure while pressing the request warning switch tabs in the direction of the arrow (1).

am6zzw00003404

4.  Install in the reverse order of removal.