CIGARETTE LIGHTER REMOVAL/INSTALLATION

id092000803100

1. Disconnect the negative battery cable.

2. Remove the following parts:

(1) Upper panel (See UPPER PANEL REMOVAL/INSTALLATION.)

(2) Shift knob (MTX) (See MANUAL TRANSAXLE SHIFT MECHANISM REMOVAL/INSTALLATION [G35M-R].) (See MANUAL TRANSAXLE SHIFT MECHANISM REMOVAL/INSTALLATION [G66M-R].) (See MANUAL TRANSAXLE SHIFT MECHANISM REMOVAL/INSTALLATION [A26M-R].)

(3) Shift panel (See SHIFT PANEL REMOVAL/INSTALLATION.)

(4) Decoration panel (See DECORATION PANEL REMOVAL/INSTALLATION.)

(5) Center panel lower (See CENTER PANEL LOWER REMOVAL/INSTALLATION.)

3. Remove in the order indicated in the table.

am6zzw00001364

1

Cigarette lighter plug

2

Socket

(See Socket Removal Note.)

3

Ring

(See Ring Removal Note.)

4. Install in the reverse order of removal.

Socket Removal Note

1. Remove the socket in the direction of the arrow (2) shown in the figure while opening the rings in the direction of the arrow (1) using a tape-wrapped fastener remover.

am6zzw00003540

Ring Removal Note

1. Remove the ring in the direction of the arrow (2) shown in the figure while pressing the ring tabs in the direction of the arrow (1).

am6zzw00003541

1	Cigarette lighter plug
2	Socket (See Socket Removal Note.)
3	Ring (See Ring Removal Note.)