FRONT DOOR HINGE REMOVAL/INSTALLATION

id091100520500

1.  Disconnect the negative battery terminal. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION.)

2.  Remove the following parts:

(1)  Set plate (See SET PLATE REMOVAL/INSTALLATION.)

(2)  Front bumper (See FRONT BUMPER REMOVAL/INSTALLATION.)

(3)  Front combination light (See FRONT COMBINATION LIGHT REMOVAL/INSTALLATION.)

(4)  Side step molding (See SIDE STEP MOLDING REMOVAL/INSTALLATION.)

(5)  Front fender molding (See FRONT FENDER MOLDING REMOVAL/INSTALLATION.)

(6)  Front fender panel (See FRONT FENDER PANEL REMOVAL/INSTALLATION.)

(7)  Front door (See FRONT DOOR REMOVAL/INSTALLATION.)

3.  Remove in the order shown in the figure.

am6xuw00011911

1	Bolt
2	Front door hinge

4.  Install in the reverse order of removal.

5.  Adjust the headlight aiming. (See HEADLIGHT AIMING.)

6.  Perform the side camera aiming. (with side camera) (See 360°VIEW MONITOR SYSTEM AIMING.)