REAR WASHER HOSE REMOVAL/INSTALLATION
id091900801600
1. Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-G 2.0, SKYACTIV-G 2.5].) (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-G 2.0, SKYACTIV-G 2.5 (WITHOUT i-stop)].) (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-D 2.2].)
2. Remove the mudguard (RH). (See MUDGUARD REMOVAL/INSTALLATION.)
3. Disconnect the rear washer hose A from the washer motor.
4. Remove the rear washer hose A from the washer tank hook.
5. Remove the rear washer hose A from clips A and B.
6. Disconnect the rear washer hose A from the joint pipe A and remove it.
7. Disconnect the rear washer hose B from the joint pipe A.
am6zzw00009077
|
8. Remove the sunroof seaming welt. (with sunroof system)
9. Remove the A pillar trim. (See A-PILLAR TRIM REMOVAL/INSTALLATION.)
10. Disconnect the rear washer hose B from the joint pipe B and remove it.
11. Disconnect the rear washer hose C from the joint pipe B.
ac5wzw00001625
|
12. Remove the following parts:
13. Remove the tape and clips shown in the figure.
Without sunroof
am6zzw00009078
|
With sunroof
am6zzw00009079
|
14. Disconnect the rear washer hose C from the joint pipe C and remove it.
15. Disconnect the rear washer hose D from the joint pipe C.
ac5wzw00001628
|
16. Remove the liftgate upper trim. (See LIFTGATE UPPER TRIM REMOVAL/INSTALLATION.)
17. Partially peel the liftgate grommet in the direction of arrow (1) shown in the figure, and remove the liftgate grommet from the liftgate grommet inner.
ac5wzw00004636
|
18. Using a tape-wrapped flathead screwdriver, press the liftgate grommet inner tabs A in the directions of arrows (2) and (3) shown in the figure and remove the liftgate grommet inner from the liftgate in the direction of arrow (4).
ac5jjw00001537
|
19. Disconnect the rear washer hose D from the rear washer nozzle and remove it.
am6zzw00010782
|
20. Install in the reverse order of removal.