SUPPLIER IDENTIFICATION PROCEDURE [AUDIO]

id0902f6358400

Note

•  The supplier can vary with the module. When asking the supplier (service center) for repair or replacement, identify the supplier and fill in the Audio Repair Order Form with the following procedures.

Identification Using the Label or Inscribed Lettering

1.  Disconnect the negative battery cable.

2.  Remove the following parts:

(1)  Shift lever knob (MT) (See TRANSMISSION REMOVAL/INSTALLATION [P66M-D].)

(2)  Shift knob (AT) (See SELECTOR LEVER REMOVAL/INSTALLATION.)

(3)  Upper panel (See CONSOLE REMOVAL/INSTALLATION.)

(4)  Ashtray panel (See CONSOLE REMOVAL/INSTALLATION.)

(5)  Lower panel (See LOWER PANEL REMOVAL/INSTALLATION.)

(6)  Center panel unit (See CENTER PANEL UNIT REMOVAL/INSTALLATION.)

3.  Verify the supplier by referring to the label attached to each unit.

ar8uuw00001069

Verify Using the Diagnostic Assist Function

1.  With the audio unit power to ON, press the POWER/VOLUME switch and simultaneously press the Preset switch 5 for approx. 3 s or more.

ar8uuw00001070

2.  Identify the supplier code by referring to the information display.

ar8uuw00001100

Supplier code	Supplier name
01	SANYO Automedia
02	Panasonic
03	Clarion
04	Pioneer

Note

•  The supplier code can also be identified from the DTC displays screen.

ar8uuw00001101

3.  Turn the audio unit to OFF or the ignition switch to the LOCK position to stop the diagnostic assist function.