INFORMATION DISPLAY REMOVAL/INSTALLATION
id092200801400
1. Disconnect the negative battery cable.
2. Remove the following parts (with audio unit):
- (1) Shift lever knob (MT) (See TRANSMISSION REMOVAL/INSTALLATION [P66M-D].)
- (2) Shift knob (AT) (See SELECTOR LEVER REMOVAL/INSTALLATION.)
- (3) Upper panel (See CONSOLE REMOVAL/INSTALLATION.)
- (4) Ashtray panel (See CONSOLE REMOVAL/INSTALLATION.)
- (5) Lower panel (See LOWER PANEL REMOVAL/INSTALLATION.)
- (6) Center panel unit (See CENTER PANEL UNIT REMOVAL/INSTALLATION.)
3. Remove the following parts (without audio unit):
- (1) Speaker grille (See SPEAKER GRILLE REMOVAL/INSTALLATION.)
- (2) Shift lever knob (MT) (See TRANSMISSION REMOVAL/INSTALLATION [P66M-D].)
- (3) Console panel (See CONSOLE REMOVAL/INSTALLATION.)
- (4) Ashtray (See CONSOLE REMOVAL/INSTALLATION.)
- (5) Lower panel (See LOWER PANEL REMOVAL/INSTALLATION.)
- (6) Center panel (See CENTER PANEL REMOVAL/INSTALLATION.)
4. Remove in the order indicated in the table.
|
1
|
Screw
|
|
2
|
Connector
|
|
3
|
Information display
|
5. Install in the reverse order of removal.
